Difference between revisions of "BuildTheCode"

From Sirikata Wiki
Jump to: navigation, search
(Without Cygwin (manual): single submodule update command)
 
(72 intermediate revisions by 10 users not shown)
Line 1: Line 1:
=== Dependencies ===
+
= Dependencies =
  
Sirikata depends on quite a bit of external code to make everything work. We'll try to maintain a full list of dependencies and brief descriptions of how they're used [[Dependencies|here]].
+
Sirikata depends on quite a bit of external libraries. We provide install scripts and precompiled binaries to get you up and running quickly.
  
When building Sirikata you have two options: handle installing dependencies yourself or use our install script to help you build and install everything that's needed. The instructions here will explain how to use our install script.  Generally, as long as you use the correct version, standard install procedure applies to all packages.  For any where we require a custom build or non-standard build parameters, we'll note that on the [[Dependencies|dependencies page]].
+
A makefile in the top-level directory provides commands for checking out the dependencies repository and installing them. While the <tt>depends</tt> target is usually what you want, there are a few variants you can use instead:
  
You can look at the install script for more details, but the basic outline of what the install procedure does for all platforms is:
+
* <tt>minimal-depends</tt> - the minimal dependencies required to get the system building
* Figure out which platform you're on, possibly which version and development tools as well.
+
* <tt>minimal-graphics-depends</tt> - the minimal dependencies required to get 3D graphics working, i.e. to run a client, but not with all the bells and whistles
* Checkout the platform specific directory from our dependencies repository.  This includes a second stage install script and source and binary packages.
+
* <tt>headless-depends</tt> - all dependencies that can be run headless, i.e. everything but the graphics support. Useful to avoid building expensive dependencies and plugins when you're going to be running on a server 
* Run an install script from this repository which:
+
* <tt>full-depends</tt> - all dependencies, enabling all features of the system, and enables use of root to install system packages
** Possibly tries to install system provided packages that we need
+
** Extracts binary packages locally in your tree
+
** Compiles source packages and installs them locally in your tree
+
  
Note that some of the dependency files are quite large.  When you run the install commands, it may appear the script has hung, but its likely just checking out the packages.
+
If you want more details, [[Dependencies]] gives a list of required and optional libraries and a brief description of how they are used.
  
==== Windows and Mac ====
+
{{note}} Some dependency files are quite large, especially the precompiled binaries.  When you run the install commands, it may appear the script has hung, but its likely just checking out the packages.
Windows and Mac never require root access or build tools; all dependencies are binaries that are installed into your source tree (under sirikata/dependencies)To install simply run the commands:
+
  
  cd sirikata/
+
== CMake ==
  make depends
+
  
You should now have a sirikata/dependencies directory containing all the dependencies.
+
We use CMake on all platforms to check for dependencies and generate a build script.  The Linux dependencies will install CMake from your system's package manager if you allow it to use root.  Otherwise and for all Mac and Windows platforms, CMake is not installed automatically.  You should use the install tool from [http://www.cmake.org the CMake website] or install it using your system's package manager.  CMake 2.6 or higher is required.
  
CMake is not included in this installation.  You should use the install tool from [http://www.cmake.org the CMake website].
+
{{note}} On OS X, when the installer asks if you want to install the command-line version of the tools, say '''yes'''. While our build system can be run through the GUI, some dependencies also use CMake and you do not want to have to perform those install steps manually.
  
==== Linux ====
+
== Subversion ==
  
Currently the install script expects an Ubuntu system, 8.04 or greaterThere are two modes of installation - basic or fullThe basic mode will install everything it can within the source tree and won't try to install any system libraries (i.e. it assumes you have already installed libraries for which the system provided versions are sufficient).  This is useful if you just need to get the custom dependencies in a new clone, having already built Sirikata before.  To install using the basic mode issue these commands:
+
Because of their size, dependencies are stored in subversion repositoriesIf you want to use our automated dependency scripts, you'll need Subversion installedIt is installed on Mac by default, Linux users can use their distributions system package, and Windows users can either install it via Cygwin or use [http://tortoisesvn.tigris.org/ TortoiseSVN].
 +
 
 +
== Simple Method: Makefile ==
 +
On all platforms, if you have the right tools (make, subversion, and unzip on Windows provided by Cygwin) a Makefile is provided in the root directory which checks out and either builds or extracts dependencies to <tt>sirikata/dependencies/</tt>:
  
 
   cd sirikata/
 
   cd sirikata/
 
   make depends
 
   make depends
  
The full mode requires root access and will install system libraries as well.  This mode is a superset of the basic mode. To install in this mode, issue the following commands:
+
== Windows Notes ==
 +
The simple method requires Cygwin. All dependencies are installed locally in the Sirikata checkout.  No root access is needed.
  
  cd sirikata/
+
{{note}} The Windows dependencies support Visual Studio 2008 SP1 and later, including Express editions. You '''must''' have SP1 installed for Visual Studio 2008. Visual Studio 2005 and earlier are no longer supported.
  make fulldepends
+
 
 +
=== Without Cygwin (manual) ===
 +
If you do not have Cygwin and do not want to install it, you can perform the steps manually.  Using a subversion client, checkout
 +
http://sirikatawin32.googlecode.com/svn/trunk/
 +
to <tt>sirikata/dependencies/</tt>.
 +
 
 +
Go into the dependencies folder and unzip all of the packages directly into the dependencies directory. Make sure to select "Extract Here". If that option is not available, remove the name of the zip file from the end to indicate where to extract, so it just ends with "dependencies".  The extracted directories should not have the same name as the zip files.
 +
 
 +
Then got to the top-level directory and run this command:
 +
git submodule update --init --recursive
 +
 
 +
== Mac ==
 +
 
 +
=== Required Tools ===
 +
 
 +
You'll need a few required tools, most of which are built in. At a minimum, you'll need git and wget. These are easy to get from [http://mxcl.github.com/homebrew/ homebrew].
 +
 
 +
=== 32 vs. 64 bit ===
 +
 
 +
While other platforms (e.g. Linux) have supported 64 bit builds for awhile, currently many dependencies still don't support 64 bit builds on OS X. Because of this we force all builds into 32-bit i386 mode.
 +
 
 +
===== XCode and Developer Tools =====
 +
 
 +
The transitions between Leopard, Snow Leopard, and Lion, gcc 4.0 and 4.2, and XCode 3 and 4 have made it quite challenging to support all configurations of OS X development machines. Here are the configurations which are known to work and are the suggested way to configure your environment:
 +
 
 +
* If you are on Lion, you should just install XCode 4. Currently it will include gcc 4.2.
 +
* If you are on Leopard or Snow Leopard you should use XCode 3.2.6 and gcc 4.0.
 +
 
 +
In both cases, when you run the dependency install script it should list whether it has found those configurations.
 +
 
 +
You can install XCode 3.2.x in parallel to XCode 4.0 if you already have that version.  You can either download XCode at [http://developer.apple.com/mac] or use the Snow Leopard DVD: under “Optional Installs”, install “Xcode.mpkg” to get 3.2. Use all default options. We highly recommend at least 3.2.2 as previous versions had issues with hanging.
 +
 
 +
{{note}} If you already installed XCode 4, then gcc and g++ were upgraded to version 4.2. The simplest course of action is to (re)install XCode 3.2 in parallel from [http://connect.apple.com/cgi-bin/WebObjects/MemberSite.woa/wo/5.1.17.2.1.3.3.1.0.1.1.0.3.3.3.3.1 here] -- the setup should work fine next to XCode 4.  You might be able to get by just by copying the old files (gcc-4.0 and g++-4.0) from /Developer-old/usr/bin back to /Developer/usr/bin, but this probably won't work for Snow Leopard (OS X 10.6).
 +
 
 +
You may get errors of the following form: "CMake Error: The following variables are used in this project, but they are set to NOTFOUND."  For the Boost_INCLUDE_DIR variable, you can edit CMakeCache.txt to set the variable to the directory containing the Boost header files.  It should be something like sirikata/dependencies/boost_1_45_0/boost.
 +
 
 +
== Linux ==
 +
The install script expects an Ubuntu system, 8.04 or greater.
 +
 
 +
If you want to install the system package dependencies directly, issue the following command:
 +
 
 +
sudo apt-get install \
 +
git-core cmake sed unzip zip automake1.9 nvidia-cg-toolkit jam g++ \
 +
libzzip-dev libxt-dev libxaw7-dev libxxf86vm-dev libxrandr-dev libfreetype6-dev \
 +
libxext-dev autoconf libtool libpcre3-dev flex bison patch libbz2-dev gawk \
 +
libglu1-mesa-dev tofrodos freeglut3-dev scons libexpat1-dev \
 +
libgtk2.0-dev libnss3-dev libgconf2-dev gperf libasound2-dev subversion \
 +
libtool autoconf ruby flex libgsl0-dev libssl-dev libspeex-dev libxss-dev \
 +
libdbus-glib-1-dev libgnome-keyring-dev libxml2-dev libjpeg62-dev libcups2-dev \
 +
wget libcurl4-gnutls-dev build-essential libxmu-dev libxi-dev libusb-1.0-0-dev \
 +
yasm
 +
 
 +
For Ubuntu 11.04 and earlier, add:
 +
 
 +
sudo apt-get install libglut3-dev
 +
 
 +
These packages should cover everything you need for the entire system, including the graphical client and all scripting plugins.
  
=== Sirikata ===
+
= Building Sirikata =
  
 
We use CMake to generate our build scripts.  Make is used on Mac and Linux and Visual Studio is used on Windows to perform the actual build.  All three builds follow the same basic steps:
 
We use CMake to generate our build scripts.  Make is used on Mac and Linux and Visual Studio is used on Windows to perform the actual build.  All three builds follow the same basic steps:
Line 43: Line 98:
 
* Run your build tool.
 
* Run your build tool.
  
==== Windows ====
+
== Windows ==
  
Start up CMake and point both paths to sirikata/build/cmake.  Hit configure twice.  If you installed any dependencies in non-standard locations, point CMake to them now.  To generate the build files, hit OK.
+
Start up CMake and point both paths to sirikata/build/cmake.  Hit configure twice.  If you installed any dependencies in non-standard locations, point CMake to them now.  To generate the build files, hit Generate.
 +
On Windows Vista or later you might want to change CMAKE_INSTALL_PREFIX to the directory where you want to install your compiled binaries and hit configure again, because by default CMake will generate Visual Studio project that will try to install compiled binaries into %PROGRAMFILES%. This requires administrative privileges, which is why build will fail (unless you run Visual Studio with administrative privileges or have disabled UAC).
  
Now browse to sirikata/build/cmake.  Open Sirikata.sln and run Build All.
+
Now browse to sirikata/build/cmake.  Open Sirikata.sln.  Select the configuration you want to build -- we highly recommend RelWithDebInfo because Debug runs very slowly and RelWithDebInfo still gets you useful information when run in the debugger. Finally, run Build All.
  
 
This should result in all libraries, plugins, and binaries in the sirikata/build/cmake/debug or sirikata/build/cmake release, depending on which configuration you built.
 
This should result in all libraries, plugins, and binaries in the sirikata/build/cmake/debug or sirikata/build/cmake release, depending on which configuration you built.
  
===== Notes =====
+
=== Notes ===
 
* There aren't standard locations to search for dependencies on Windows.  Obviously we've setup the build system to work cleanly with the dependency install script.  The easiest way to get a manual installation of dependencies on Windows to work is to use the same layout as the install script, where all dependencies are located in sirikata/dependencies.  If you don't do this, you will almost certainly need to manually specify the locations of some libraries in CMake.
 
* There aren't standard locations to search for dependencies on Windows.  Obviously we've setup the build system to work cleanly with the dependency install script.  The easiest way to get a manual installation of dependencies on Windows to work is to use the same layout as the install script, where all dependencies are located in sirikata/dependencies.  If you don't do this, you will almost certainly need to manually specify the locations of some libraries in CMake.
* The build is known to work for VS2005 and VS2008. However, be aware that for VS2005 '''you must have the latest service pack installed'''.
+
* The build is known to work for VS2008, for both regular and Express versions.
 +
* If you get error 0xc0000022, check the permissions of the sirikata top-level directory. If you used Cygwin's version of git, it will remove execute permissions for security purposes. You may enable execute by doing "chmod -R +x sirikata" in cygwin, or Granting yourself Full Control in Right Click->Properties->Security (make sure to click the Replace All Entries in Child Objects checkbox).
 +
* Getting errors like "fatal error C1900: Il mismatch between 'P1' version '20080116' and 'P2' version '20070207'"? You're probably on Visual Studio Express 2008 and haven't updated to SP1.
  
==== Mac and Linux ====
+
==== DLL Path under windows ====
 +
For setup on Windows, run /tools/win32/copydlls.bat '''from the Sirikata root directory'''.  All that this does is copy several dependencies' dll-s (and several files from Berkelium) into the build/cmake/BUILDTYPE directory, where BUILDTYPE is Debug, Release, or RelWithDebInfo. 
 +
 
 +
Note that Sirikata currently does not work in Windows 2000, due to the lack of a few raw input functions (RegisterRawInputDevice) that SDL 1.3 uses. This will hopefully be fixed in SDL at some point to make it use the old DirectX raw input system.
 +
 
 +
== Mac and Linux ==
  
 
For convenience we provide a top level makefile which performs the standard build operations.  If you want a default build and have used the install script for dependencies, do:
 
For convenience we provide a top level makefile which performs the standard build operations.  If you want a default build and have used the install script for dependencies, do:
Line 74: Line 137:
  
 
When the build completes you should have the libraries, plugins, and binaries in sirikata/build/cmake.
 
When the build completes you should have the libraries, plugins, and binaries in sirikata/build/cmake.
 +
 +
=== Additional Tools ===
 +
 +
If you're planning on developing Sirikata, it can be helpful to use ccache or a distributed compiler tool like distcc. These tools speed up compilation, either avoiding duplicate work after running make clean or by distributed compile jobs across the network.  We provide a wrapper script that tries to use these automatically. Instead of the steps above, use this script:
 +
 +
  cd sirikata/build/cmake
 +
  rm CMakeCache.txt  # We need to clear out old settings if you already ran CMake
 +
  ./cmake_with_tools.sh .
 +
 +
The script passes other settings along to CMake, so you can add any parameters you would normally pass to CMake to this command as well.
 +
 +
=== Mac XCode Project ===
 +
 +
Many mac developers prefer to use the XCode programming environment.
 +
To do this, cmake will need to be configured to use XCode
 +
 +
Steps are:
 +
 +
  1. test -d build/cmake/Debug || mkdir build/cmake/Debug
 +
        1. The directory for XCode build products.
 +
  2. python csv_converter.py build/cmake/Debug/scene.csv scene.db
 +
        1. Generate a scene for use by the XCode project.
 +
  3. cd build/cmake
 +
  4. ln -s ../../dependencies/Frameworks Frameworks
 +
        1. To fix brittle paths in Xcode project.
 +
  5. cmake -G Xcode .
 +
  6. cd Debug
 +
  7. ln -s ../Sirikata.Protocol.dll Sirikata.Protocol.dll
 +
  8. ln -s ../Sirikata.Runtime.dll Sirikata.Runtime.dll
 +
  9. cd ..
 +
  10. Launch Xcode
 +
  11. Open Sirikata.xcodeproj
 +
  12. Edit project settings
 +
        1. General tab
 +
        2. Choose project root
 +
        3. Select build/cmake directory. Click OK. Value should just be <Project File Directory>.
 +
              1. This fixes a problem that prevents debugger from working.
 +
  13. Project menu
 +
        1. Select active target ALL_BUILD
 +
        2. Select active project executable cppoh
 +
        3. Select active build configuration Debug
 +
  14. Close XCode to save the project
 +
  15. Reopen Sirikata.xcodeproj
 +
  16. Build it
 +
  17. Debugger
 +
        1. Confirm that you can set a break point.
 +
        2. Run debugger
 +
        3. Confirm that it stops at a break point.
 +
        4. Confirm that it displays source code.
 +
        5. (trouble shoot back to step 10)
 +
 +
= Running Sirikata =
 +
Assuming the previous steps have completed successfully, you should have a few binaries built and you are ready to [[Getting_Started_for_Users|run Sirikata]].

Latest revision as of 19:18, 21 April 2012

Dependencies

Sirikata depends on quite a bit of external libraries. We provide install scripts and precompiled binaries to get you up and running quickly.

A makefile in the top-level directory provides commands for checking out the dependencies repository and installing them. While the depends target is usually what you want, there are a few variants you can use instead:

  • minimal-depends - the minimal dependencies required to get the system building
  • minimal-graphics-depends - the minimal dependencies required to get 3D graphics working, i.e. to run a client, but not with all the bells and whistles
  • headless-depends - all dependencies that can be run headless, i.e. everything but the graphics support. Useful to avoid building expensive dependencies and plugins when you're going to be running on a server
  • full-depends - all dependencies, enabling all features of the system, and enables use of root to install system packages

If you want more details, Dependencies gives a list of required and optional libraries and a brief description of how they are used.

Note Some dependency files are quite large, especially the precompiled binaries. When you run the install commands, it may appear the script has hung, but its likely just checking out the packages.

CMake

We use CMake on all platforms to check for dependencies and generate a build script. The Linux dependencies will install CMake from your system's package manager if you allow it to use root. Otherwise and for all Mac and Windows platforms, CMake is not installed automatically. You should use the install tool from the CMake website or install it using your system's package manager. CMake 2.6 or higher is required.

Note On OS X, when the installer asks if you want to install the command-line version of the tools, say yes. While our build system can be run through the GUI, some dependencies also use CMake and you do not want to have to perform those install steps manually.

Subversion

Because of their size, dependencies are stored in subversion repositories. If you want to use our automated dependency scripts, you'll need Subversion installed. It is installed on Mac by default, Linux users can use their distributions system package, and Windows users can either install it via Cygwin or use TortoiseSVN.

Simple Method: Makefile

On all platforms, if you have the right tools (make, subversion, and unzip on Windows provided by Cygwin) a Makefile is provided in the root directory which checks out and either builds or extracts dependencies to sirikata/dependencies/:

 cd sirikata/
 make depends

Windows Notes

The simple method requires Cygwin. All dependencies are installed locally in the Sirikata checkout. No root access is needed.

Note The Windows dependencies support Visual Studio 2008 SP1 and later, including Express editions. You must have SP1 installed for Visual Studio 2008. Visual Studio 2005 and earlier are no longer supported.

Without Cygwin (manual)

If you do not have Cygwin and do not want to install it, you can perform the steps manually. Using a subversion client, checkout

http://sirikatawin32.googlecode.com/svn/trunk/ 

to sirikata/dependencies/.

Go into the dependencies folder and unzip all of the packages directly into the dependencies directory. Make sure to select "Extract Here". If that option is not available, remove the name of the zip file from the end to indicate where to extract, so it just ends with "dependencies". The extracted directories should not have the same name as the zip files.

Then got to the top-level directory and run this command:

git submodule update --init --recursive

Mac

Required Tools

You'll need a few required tools, most of which are built in. At a minimum, you'll need git and wget. These are easy to get from homebrew.

32 vs. 64 bit

While other platforms (e.g. Linux) have supported 64 bit builds for awhile, currently many dependencies still don't support 64 bit builds on OS X. Because of this we force all builds into 32-bit i386 mode.

XCode and Developer Tools

The transitions between Leopard, Snow Leopard, and Lion, gcc 4.0 and 4.2, and XCode 3 and 4 have made it quite challenging to support all configurations of OS X development machines. Here are the configurations which are known to work and are the suggested way to configure your environment:

  • If you are on Lion, you should just install XCode 4. Currently it will include gcc 4.2.
  • If you are on Leopard or Snow Leopard you should use XCode 3.2.6 and gcc 4.0.

In both cases, when you run the dependency install script it should list whether it has found those configurations.

You can install XCode 3.2.x in parallel to XCode 4.0 if you already have that version. You can either download XCode at [1] or use the Snow Leopard DVD: under “Optional Installs”, install “Xcode.mpkg” to get 3.2. Use all default options. We highly recommend at least 3.2.2 as previous versions had issues with hanging.

Note If you already installed XCode 4, then gcc and g++ were upgraded to version 4.2. The simplest course of action is to (re)install XCode 3.2 in parallel from here -- the setup should work fine next to XCode 4. You might be able to get by just by copying the old files (gcc-4.0 and g++-4.0) from /Developer-old/usr/bin back to /Developer/usr/bin, but this probably won't work for Snow Leopard (OS X 10.6).

You may get errors of the following form: "CMake Error: The following variables are used in this project, but they are set to NOTFOUND." For the Boost_INCLUDE_DIR variable, you can edit CMakeCache.txt to set the variable to the directory containing the Boost header files. It should be something like sirikata/dependencies/boost_1_45_0/boost.

Linux

The install script expects an Ubuntu system, 8.04 or greater.

If you want to install the system package dependencies directly, issue the following command:

sudo apt-get install \
git-core cmake sed unzip zip automake1.9 nvidia-cg-toolkit jam g++ \
libzzip-dev libxt-dev libxaw7-dev libxxf86vm-dev libxrandr-dev libfreetype6-dev \
libxext-dev autoconf libtool libpcre3-dev flex bison patch libbz2-dev gawk \
libglu1-mesa-dev tofrodos freeglut3-dev scons libexpat1-dev \
libgtk2.0-dev libnss3-dev libgconf2-dev gperf libasound2-dev subversion \
libtool autoconf ruby flex libgsl0-dev libssl-dev libspeex-dev libxss-dev \
libdbus-glib-1-dev libgnome-keyring-dev libxml2-dev libjpeg62-dev libcups2-dev \
wget libcurl4-gnutls-dev build-essential libxmu-dev libxi-dev libusb-1.0-0-dev \
yasm

For Ubuntu 11.04 and earlier, add:

sudo apt-get install libglut3-dev

These packages should cover everything you need for the entire system, including the graphical client and all scripting plugins.

Building Sirikata

We use CMake to generate our build scripts. Make is used on Mac and Linux and Visual Studio is used on Windows to perform the actual build. All three builds follow the same basic steps:

  • Run cmake, possibly modifying the configuration.
  • Run your build tool.

Windows

Start up CMake and point both paths to sirikata/build/cmake. Hit configure twice. If you installed any dependencies in non-standard locations, point CMake to them now. To generate the build files, hit Generate. On Windows Vista or later you might want to change CMAKE_INSTALL_PREFIX to the directory where you want to install your compiled binaries and hit configure again, because by default CMake will generate Visual Studio project that will try to install compiled binaries into %PROGRAMFILES%. This requires administrative privileges, which is why build will fail (unless you run Visual Studio with administrative privileges or have disabled UAC).

Now browse to sirikata/build/cmake. Open Sirikata.sln. Select the configuration you want to build -- we highly recommend RelWithDebInfo because Debug runs very slowly and RelWithDebInfo still gets you useful information when run in the debugger. Finally, run Build All.

This should result in all libraries, plugins, and binaries in the sirikata/build/cmake/debug or sirikata/build/cmake release, depending on which configuration you built.

Notes

  • There aren't standard locations to search for dependencies on Windows. Obviously we've setup the build system to work cleanly with the dependency install script. The easiest way to get a manual installation of dependencies on Windows to work is to use the same layout as the install script, where all dependencies are located in sirikata/dependencies. If you don't do this, you will almost certainly need to manually specify the locations of some libraries in CMake.
  • The build is known to work for VS2008, for both regular and Express versions.
  • If you get error 0xc0000022, check the permissions of the sirikata top-level directory. If you used Cygwin's version of git, it will remove execute permissions for security purposes. You may enable execute by doing "chmod -R +x sirikata" in cygwin, or Granting yourself Full Control in Right Click->Properties->Security (make sure to click the Replace All Entries in Child Objects checkbox).
  • Getting errors like "fatal error C1900: Il mismatch between 'P1' version '20080116' and 'P2' version '20070207'"? You're probably on Visual Studio Express 2008 and haven't updated to SP1.

DLL Path under windows

For setup on Windows, run /tools/win32/copydlls.bat from the Sirikata root directory. All that this does is copy several dependencies' dll-s (and several files from Berkelium) into the build/cmake/BUILDTYPE directory, where BUILDTYPE is Debug, Release, or RelWithDebInfo.

Note that Sirikata currently does not work in Windows 2000, due to the lack of a few raw input functions (RegisterRawInputDevice) that SDL 1.3 uses. This will hopefully be fixed in SDL at some point to make it use the old DirectX raw input system.

Mac and Linux

For convenience we provide a top level makefile which performs the standard build operations. If you want a default build and have used the install script for dependencies, do:

 cd sirikata/
 make

If you'd like to run the build manually, do the following (essentially what is in the makefile):

 cd sirikata/build/cmake
 cmake . [-DCMAKE_BUILD_TYPE=Debug|Release]
 make

To interactively adjust settings, for instance to point CMake to a different version of libraries:

 cd sirikata/build/cmake
 ccmake .

When the build completes you should have the libraries, plugins, and binaries in sirikata/build/cmake.

Additional Tools

If you're planning on developing Sirikata, it can be helpful to use ccache or a distributed compiler tool like distcc. These tools speed up compilation, either avoiding duplicate work after running make clean or by distributed compile jobs across the network. We provide a wrapper script that tries to use these automatically. Instead of the steps above, use this script:

 cd sirikata/build/cmake
 rm CMakeCache.txt   # We need to clear out old settings if you already ran CMake
 ./cmake_with_tools.sh .

The script passes other settings along to CMake, so you can add any parameters you would normally pass to CMake to this command as well.

Mac XCode Project

Many mac developers prefer to use the XCode programming environment. To do this, cmake will need to be configured to use XCode

Steps are:

  1. test -d build/cmake/Debug || mkdir build/cmake/Debug
        1. The directory for XCode build products.
  2. python csv_converter.py build/cmake/Debug/scene.csv scene.db
        1. Generate a scene for use by the XCode project.
  3. cd build/cmake
  4. ln -s ../../dependencies/Frameworks Frameworks
        1. To fix brittle paths in Xcode project.
  5. cmake -G Xcode .
  6. cd Debug
  7. ln -s ../Sirikata.Protocol.dll Sirikata.Protocol.dll
  8. ln -s ../Sirikata.Runtime.dll Sirikata.Runtime.dll
  9. cd ..
  10. Launch Xcode
  11. Open Sirikata.xcodeproj
  12. Edit project settings
        1. General tab
        2. Choose project root
        3. Select build/cmake directory. Click OK. Value should just be <Project File Directory>.
              1. This fixes a problem that prevents debugger from working.
  13. Project menu
        1. Select active target ALL_BUILD
        2. Select active project executable cppoh
        3. Select active build configuration Debug
  14. Close XCode to save the project
  15. Reopen Sirikata.xcodeproj
  16. Build it
  17. Debugger
        1. Confirm that you can set a break point.
        2. Run debugger
        3. Confirm that it stops at a break point.
        4. Confirm that it displays source code.
        5. (trouble shoot back to step 10)

Running Sirikata

Assuming the previous steps have completed successfully, you should have a few binaries built and you are ready to run Sirikata.